View source for Topology and Geometry

This is a course that [[Henry Koo|Henry]] and [[Ben Koo|Ben]] are studying during 2021.

=Starting from here, is a transcluded page=
{{:Talk:Topology and Geometry}}

==lecture 1==
Starting from lecture 1<ref>{{:Lecture:Topology and Geometry}}</ref> of this course, we have realized that Mobius strip is a very powerful mathematical ideas. --[[User:Benkoo|Benkoo]] ([[User talk:Benkoo|talk]]) 03:35, 18 July 2021 (UTC)

Mobius strip is a strip twist by one or more times. One twist is equal to <math>180^o</math>.
Before the strip becomes a Mobius strip, it can be divided into two sides. We will name it red and blue. After you twist the strip and turn it into a Mobius strip. If the Mobius strip has an odd twist the blue part will be connected to the red part. If you have an even twist, the blue part will be connected to the blue, and the red will be connected to red. If you start to cut the middle for the blue part and the red part of the Mobius strip you will get to different kinds of outcomes:

1. The Mobius strip has an odd twist so you will get a bigger Mobius strip 

2. The Mobius strip has an even twist then you will get two Mobius strips. (that has the same length and same number of twists as the Mobius strip before  you cut)


In Topology and Geometry 
There are three-point to remember.

1.There is so much more to mathematics than numbers and formulas. (For example, there is pictorial thinking)

2. Always draw pictures whenever you work on mathematics.

3. There is so much more to pictures than photos of objects.

In Topology and geometry, you should learn to see and draw things that can't be seen physically. 
Ex. (For example) Mobius strip, when you are doing the experiment of cutting the Mobius strip yes if you didn't draw it out you still will know what will happen but if you draw it out it will let you more Easier to understand what is happening.

==lecture 2==
{{:Lecture:Topology and Geometry 2}}
==lecture 3==
==lecture 4==
==Lecture 5==
==Lecture 6==
==Lecture 7==
==Lecture 8==
==Lecture 9==
==Lecture 10==
==Lecture 11==
==Lecture 12==
==Lecture 13==
==Lecture 14==
==Lecture 15==
Please go to the following page for more detail: [[Lecture:Topology and Geometry 3]].

Also, we should make proper reference<ref>{{:Lecture:Topology and Geometry 3}}</ref>, and it will show at the Reference section.

=References=