Difference between revisions of "Calculus:Limits"

From PKC
Jump to navigation Jump to search
Line 1: Line 1:
<math> \lim_{x \to a} f(x) = L,</math>
<math> \lim_{x \to a} f(x) = L,</math>
When you see this equation it means you are try to let x approaches a.
When you see this equation it means you are trying to let x approaches a.


You may have a question why can't we just write it as  
You may have a question why can't we just write it as  
Line 6: Line 6:
<math> f(a) = L,</math>
<math> f(a) = L,</math>


some times we can't tell what is the F(a) equals to.
some times we can't tell what is F(a) equals.


example 1
example 1
Line 21: Line 21:
But in the graph if a = 1 it looks like it is than f(x) = 4
But in the graph if a = 1 it looks like it is than f(x) = 4


So the logic of the limit is approaches to not equal to. (what's the different?)
So the logic of the limit is approaching to not equal to. (what's the difference?)


it will be like this when we say x=1 then x is on.
it will be like this when we say x=1 then x is on.


But if we say <math>x \to 1</math> then it could be 1.00000....0001 or 9.9999....999, x will not be 1 it will just close to one.
But if we say <math>x \to 1</math> then it could be 1.00000....0001 or 9.9999....999, x will not be 1 it will just be close to one.


So looking at the graph you may will see h it is mean the rate of change of x most of the time we will like h or dx approaches to 0.
So looking at the graph you may see h it is mean the rate of change of x most of the time we will like h or dx approaches to 0.

Revision as of 14:02, 13 September 2021

When you see this equation it means you are trying to let x approaches a.

You may have a question why can't we just write it as

some times we can't tell what is F(a) equals.

example 1

Screen Shot 2021-08-28 at 8.02.52 PM.png

But If a = 1 then you will get

Denominator can't be 0 so it is undefined at that point.

But in the graph if a = 1 it looks like it is than f(x) = 4

So the logic of the limit is approaching to not equal to. (what's the difference?)

it will be like this when we say x=1 then x is on.

But if we say then it could be 1.00000....0001 or 9.9999....999, x will not be 1 it will just be close to one.

So looking at the graph you may see h it is mean the rate of change of x most of the time we will like h or dx approaches to 0.