Difference between revisions of "Lecture content:Topology and Geometry 3"

Revision as of 10:21, 23 July 2021

Tokieda, Tadashi (12 May 2014). Topology and Geometry. 3/15. African Institute of Mathematical Sciences.

The Operation of I:product
1. m-cube $I^{m}$
m-torus $T^{m}$
The multiplication of shape in Topology and Geometry
Quotient in topology
1. all kinds of quotient example
2. using cut to understanding quotient

@@ Line 6: / Line 6: @@
 [[Lecture:Topology and Geometry 3|Lecture 3]]
-# Solving problem by deformation
+# The Operation of I:product
-# Understanding by turning it to a higher dimension
+## m-cube <math>I^m</math>
-# Introduction to Basic Building Blocks of Topology and Geometry
+# m-torus <math>T^m</math>
-## n-ball <math>B^n</math>
+# The multiplication of shape in Topology and Geometry
-## (n-1)-sphere <math>S^n , n-1</math> (Don't know why I can't write the )
+# Quotient in topology
-## what is the different between circle and disk
+## all kinds of quotient example
+## using cut to understanding quotient