Nginx as Reverse Proxy

The first place to learn Nginx can be found in this book:

The following content is assuming that you are running an Ubuntu distribution of Linux.

Install Nginx

The following code can be copied and pasted to perform the task of installing Nginx on Ubuntu:

sudo apt-get update
sudo apt-get install nginx -y

Disable Default Virtual Host of Nginx

Then, try to unlink this existing link:

sudo unlink /etc/nginx/sites-enabled/default

Create the Reverse Proxy

Now go to the Nginx site-available directory

cd /etc/nginx/sites-available

Use a text editor or copy a file with the following file name: reverse-proxy.conf.

For example:

vi reverse-proxy.conf

Use a text editor or copy a file with the following file name: reverse-proxy.conf.

For example, use the text editor vi, you can type the following command:

vi reverse-proxy.conf

In the file, type in the following content. Please note that this configuration, especially the port number 9352 is a PKC specific specification.

server {
    listen 80;
    location / {
        proxy_pass http://127.0.0.1:9352;
    }
}

Test Nginx and the Reverse Proxy

Activate the directives by linking to /sites-enabled/ using the following command:

sudo ln -s /etc/nginx/sites-available/reverse-proxy.conf /etc/nginx/sites-enabled/reverse-proxy.conf

First, verify the syntax of all the above content is legitimate:

sudo service nginx configtest

Then, restart Nginx to kick it into action:

sudo service nginx restart

Set up Let's Encrypt

After setting up Nginx, one can consider setting up the free-of-charge Let's Encrypt certificate. The following instructions are modeled after this Medium article:

sudo add-apt-repository ppa:certbot/certbot

Then, install the python3 certbot for Nginx.

sudo apt install python3-certbot-nginx

Then, install the python3 certbot for Nginx.

cd /etc/nginx/sites-enabled/

In this directory: /etc/nginx/sites-enabled/ create the following file using a text editor or just copy a text file to this location with a name that is similar to this:dev.example.com For example, if the name of your domain is dev.thewiki.us, then the file name should be: dev.thewiki.us. Using vi as a text editor, your will type this in command line:

  
vi dev.thewiki.us.conf

                                                  
server {
    server_name dev.thewiki.us;
    # The internal IP of the VM that hosts your Apache config
    set $upstream 127.0.0.1:9352;
        location / {
        proxy_pass_header Authorization;
        proxy_pass http://$upstream;
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_http_version 1.1;
        proxy_set_header Connection “”;
        proxy_buffering off;
        client_max_body_size 0;
        proxy_read_timeout 36000s;
        proxy_redirect off;
    }
    listen 80;
}

First, test if the above file passes the syntactical test:

 
sudo nginx -t

Then, you may run:

 
sudo systemctl reload nginx

Run the Certbot to get the Let's Encrypt certificate

Before running the following statement, make sure that the domain names listed here have already had the relevant IP addresses properly associated with the domain names, such as example.com, and dev.example.com

sudo certbot --nginx -d example.com -d dev.example.com