PKC Login Test Script

Testing Procedure of PKC LogIn using OSS Selenium IDE

• The current testing method is applied to frontEnd, only.

• The current process intends to work as an example to other use cases along the software PKC.

• Selenium is an [| Open source software] that automate this process of testing.

• Selenium IDE is available on Chrome, MS Edge and Firefox browsers.

Getting Started

Installing Selenium IDE

For Chrome user, please go here
and for Firefox user, please go here
and for Edge user, please go here

Please follow the installation instructions accordingly in each browser and ensure you have successfully installed Selenium IDE

Get the .side file

.side file is the Selenium IDE file, consist of testing file.

Get it from PKC's Gitea Repository here, or you can clone using below command [Linux or Mac]

‎

 git clone https://git.pkc.pub/admin/pkc-login-test-script.git‎

Running the Test Script

Open the .side file from Selenium IDE

Once you get the .side files, which are PKC Login Test.side, please open the Selenium IDE and open the file. Please refer to screen-capture for reference.

Selenium Opening Page

Click on Open on Existing Project and navigate to wherever you saved the .side file.

Selenium Opened Project Screen

Above is the Scren after the Selenium Project is opened.

Run the testing script

Before you start the script, pleae go to command line no.5 and no.6 to put your github user and password, and Ensure that you have cleared all website History before you run the test-script.

At this point, you are ready to run your test-script. Please click on Run Current Test button to proceed.