Backup and Restore Loop

PKC Automatic Backup and Restore Process is a series of command executed on backup-source server and backup-target server. The target of the process loop is to ensure there are always a backup data that can be easily restored into target server. Below is the schematic diagram on how the process is executed.

Backup-restore

Introduction

Configuration process is done by ansible script, that is executed from ansible host. Below are the outline of deployment process in general

1. Get the source code; From github to your local machine. The source code will contain all necessary ansible script to execute the deployment process.
2. Adjust the configuration; Adjust configuration on your local machine to define the backup-and-restore loop
3. Execute Backup Process; Execute backup installation
4. Execute Restore Process; Execute restore installation